Specifications:
1. Power Supply: AC220V ± 10V, 50Hz / AC110V ± 10V, 60Hz
2. Power Consumption: 100W/24V
3. Temperature: -15 to 60 degrees
4. Humidity: <95%, without concretion
5. Passage Width: <=1200mm
6. Passing Speed: 30 persons/min (normal open), 20 persons/min (normal close)
7. Arm Open/Close Time: 2.5s
8. Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
9. Communication Interface: RS485 (Distance: <=1200m)
10. Material: Housing - 304 stainless steel Arm - Acrylic/stainless steel
11. Dimension: 168*1050mm Arm Length: Acrylic arm <=500mm
Stainless steel arm <=800mm
12. Weight: 20kgs
13. Working Environment: Indoors or outdoors with shed
14. Arm Turning: Single direction or Bi-direction
Functions and Features:
1. Problem-self-checking function.
2. Many options of working ways: Bi-direction card reading; One direction cards reading and another no reading; One direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.
6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the flap barrier and then take a valid card to be read for passing.
7. Swing barrier is with 485 interfaces for long-distance control concern.
8. Anti-rush function: If there is no open single, arm will be holding tightly.
9. Double anti-clipping function: Photocell anti-clipping and mechanical anti-clipping. When passenger is going through the swing barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a while with very slight force. Also it will alarm.
10. Swing barrier is with standard electrical interface for the integration of various readers and writers.
11. Swing barrier can count how many passengers has passed and will show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Swing barrier can control the population inside in the control of software.
15. Stable running with little noise.
Contains:
|
Mechanism, Housing, Driver board, Power supply
|
Housing Material:
|
304 stainless steel
|
Drive mode:
|
Motor drive, 6 sets Photoelectric sensor
|
Access modes:
|
1. Locked.
|
2. Remote control by computer.
|
3. Authorized.
|
Following Speed:
|
30 people/minute in Normal close mode.
|
40 people/minute in Normal open mode.
|
Noise:
|
≤ 65dB
|
Lane width:
|
600mm
|
Working state:
|
Single or bi-direction, 16modes.
|
Status Indication:
|
Allow passing through / Forbidden
|
Voltage:
|
Input AC220V (adjustable)
|
Power:
|
1. Paused: < 50 Watt
|
2. Working state: < 150 Watt
|
Communication Interface:
|
One RS485 interface
|
Two Card reader signals (Passive)
|
One Fire Alarm interface
|
Working environment:
|
Indoor, Matching with rain frame for outdoor use.
|
Working temperature
|
-15°C-75°C
|
Humidity:
|
5%-95%
|
Maintenance port:
|
2 units
|
Service Life:
|
Three million contiguous opening and closing of barrier panel.
|
Dimension:
|
168*600*1050mm
|
Net Weight:
|
40KG
|
Audited Supplier 
){kind=link}